Wajima nuri is a traditional lacquerware method originated and developed around Wajima. The word may refer to both the craft technique and urushi artifacts.
The history of Wajima-nuri
There are a number of theories as to how urushi production started in Wajima but as yet none of them have been confirmed. Vessels that contain locally found powder mixed in with the urushi undercoating have been discovered in a number of local excavations which date back to medieval times. From evidence found in the small number of handed down texts that have survived the centuries, it is thought that urushi was being produced in Wajima in the Muromachi Period (1333-1573). Important factors in the development of urushiware production are both the local abundance of readily available materials such as Noto cypress, zelkova, urushi trees and Wajima jinoko powder and the area’s favorable climatic conditions.
Wajima was historically a port of call on a major sea route which made it convenient for the transportation of materials and goods. This was probably an important contributing factor to the local development of the industry. However, the fact that the people involved in the production and distribution of urushiware had such pride in their work, and that the level of the techniques were continuously being honed, are probably the most important factors in ensuring that the tradition has been passed down so successfully to the present day.
The production process of Wajima-nuri
There is a systematic division of labor in the production process of Wajima-nuri that at its broadest level can be divided into the stages of substrate production, lacquering and decoration. Within these general categories there is a further level of specialization which includes the wooden substrate crafts of wan-kiji (wood turning to produce objects composed of concentric circles), magemono (the bending of previously soaked wood to produce substrates), sashimono (the assembly of processed wood into boxes and shelves), hou-kiji (specialist carving of more complex shapes), and the lacquering techniques of shitaji (undercoating), uwanuri (top coating), ro-iro (polishing), maki-e (predominantly decoration through the sprinkling of gold or silver into intricate patterns) and chinkin (decoration through carving of patterns onto the surface and filling the grooves with gold and sliver).
With a production process based on a system of division of labor, a piece will typically go through over one hundred stages which can take anything from six months to several years to complete. Each of the specialist fields have developed their own traditions of high level craftsmanship and efficiency at each stage of the production process which have been carefully passed down through generations and are still held in high regard today.
Each craftsman works with confidence and dedication to produce his work. The nushiya is the master craftsman and it is his job to manage and oversee the entire production process. From the time that an order is placed until the delivery of the product he is uncompromising in ensuring that at each stage the highest standards of quality are maintained.
The shape of the wooden substrate differs according to its purpose and the industry is divided into trades in which craftsmen who have mastered the necessary specialist techniques work. Certain woods are more suited to certain shapes and the correct choice of wood for each shape is another important part of the production process. Whichever kind of wood is chosen, it needs to be dried for three to five years after the tree has been felled before it can be used.
Wan-kiji, which is also known as hikimono-kiji is the technique of turning wood on a lathe a while carving it with a turning tool. It is used for producing circular vessels such as bowls, dishes, plates and pots. The woods most often used are zelkova, cherry and horse chestnut.
Using thin prepared wood with a vertical grain, the wood is soaked in water to make it pliable and then bent into round shapes such as circular trays and lunch boxes. Good quality wood is necessary such as Noto cypress or Japanese cypress.
Sashimono or kakumono, is the assembly of wood that has been made into boards. The woods most often used are Noto cypress, Japanese cypress, paulownia and gingko. The boards are used to make such things as stacked box sets, ink-stone boxes, miniature dining tables and trays.
Hou-kiji is also known as kurimono-kiji and falls within the field of sashimono. It is the specialist field of the production of substrates which have many curves and require the carving of more complex shapes such as tatami floor tables, the legs of flower vases, the mouse of sake bottle and spoons. The woods most often used are magnolia, katsura and Noto cypress.
Wajima-nuri has a characteristic lacquering method. It is known as hon-kataji and is a traditional technique of undercoating. Wajima has remained steadfast in keeping to this method and through continuing research has strived to achieve the highest quality possible in urushiware. It has become the standard in Wajima lacquering.
The parts of a wooden substrate that are most prone to damage are reinforced with cloth that is applied to the wood with urushi. Subsequent urushi undercoats are mixed with Wajima jinoko which literally means earth powder.
Jinoko is high quality baked diatomaceous earth (a light soft chalk-like sedimentary rock that contains fossilized algae that give it an absorbent quality). Jinoko is extremely heat resistant and when mixed with urushi dries to form a hard and durable coating. Jinoko in Wajima is graded according to the size of the particles and is applied to the substrate mixed with urushi from the rough ippenji (first grade) followed by ippenji Between each stage the surface is sanded when dry and with each layer the finish becomes both finer and smoother.
The repeated undercoating process however is not just for the purpose of ensuring durability. The undercoating process is also known as jitsuke and through careful manipulation of the thickness of coats and the sanding process between these coats the craftsman also determines the final shape and character of the substrate. It is an extremely important stage of the production process as there is no room for error as any oversight will be visible in the finished product. In order to produce such high quality work, a considerable level of technique is required from the craftsmen to consistently produce at such a demanding level.
In uwa-nuri high quality refined urushi is applied to the substrate with a brush. Dust is the greatest enemy at this stage which requires great care and concentration. There are several varieties of urushi which are each used according to their individual properties. The season and climate contribute to the condition of the urushi when it is used and so it has to be carefully prepared. The experience and techniques of the uwa-nuri craftsman provide him with the ability to carefully mix and adjust the urushi so that each time it is used an optimum coating is achieved.
One of the most important factors that give the both durable and elegant-its character is the beauty of the decorative techniques of maki-e and chinkin. With their harmonized colour-schemes they add a new dimension of aestheticism to urushiware.
Broadly speaking there are two main finishes in urushi. These are nuri-tate and ro-iro. Nuri-tate refers to the finish that is achieved by applying the final coat of urushi and doing no other work on it after it has dried. Ro-iro is a repeated process of rubbing urushi into the top coat and then polishing it. At the end, the final polishing is carried out using the skin of the hand until even the tiniest scratches have been removed. The resultant mirror-like finish which is unique to urushi sets off the gold and silver decorative work.
This is the decorative technique of using urushi to draw patterns on a lacquered surface and then sprinkling on gold or silver. It has a history of several thousand years and is one of the representative decorative techniques in Japanese urushi art. Within maki-e there are a number of specialist techniques such as hira maki-e (flat collage-like designs), togidashi maki-e (sanded through designs) and taka maki-e (raised designs). These can be used in a variety of ways to achieve many different kinds of finishes.
Chinkin is a decorative technique that involves carving into the lacquered surface of urushiware and filling these grooves with gold leaf or powder. A round-tipped chisel is the standard tool and is used for carving lines and grooves but other special chisels are also used for different particular tasks such as carving shallow wider areas or gouging out deeper grooves in the surface.
Wajima Museum of Urushi Art, Japan
Ishikawa Wajima Urushi Art Museum is the only lacquer art museum in the world in Wajima City, Ishikawa Prefecture. This spacious Museum displays a number of lacquer art works by various artists belonging to different periods, some of whom are members of Art Academy and persons designated as “Living National Cultural Treasure”. Visitors can also watch video clips related to lacquer art. The Museum has a collection of not only Wajima lacquer art but also lacquer work from different regions of Japan as well as from overseas. The Museum gives an insight into the serious nature of lacquer art.
The Wajima Lacquer Art Museum in Ishikawa Prefecture is the only lacquer art museum in the world that always displays lacquerware in all rooms. As an originating base of excellent lacquer culture world-class, 1991 (Heisei was opened in 3 years).
The exterior of the building has a distinctive design inspired by Shogakuin ‘s school building, and lacquer is used throughout the spacious hall. And lacquerware or watch the video to introduce the work world of the manufacturing process and Urushigei writers, it is possible to browse freely the full lacquer and art-related books.
In addition to the Shioriori exhibition, there is a permanent exhibition of the history and culture of Wajima Lacquer known as Japan’s leading lacquerware.
There are also experience menus for “Sinking spoon coloring experience”, “Shinkin chopping coloring experience” and “Makie strap experience” (reservation required).
The official mascot character “Wanjima”, Wajima Urushi Art Museum, Ishikawa Prefecture, participates in various events and strives to disseminate information using Twitter, Facebook, and Instagram.
From July 13th (Saturday) to September 8th (Sunday), an exhibition “Lacquer craftsmanship of the lacquer ware – world of prayers and wishes” was held to celebrate the beginning of the new era.