Australian residential architectural styles have evolved significantly over time, from the early days of structures made from relatively cheap and imported corrugated iron (which can still be seen in the roofing of historic homes) to more sophisticated styles borrowed from other countries, such as the Victorian style from the United Kingdom, the Georgian style from North America and Europe and the Californian bungalow from the United States. A common feature of the Australian home is the use of fencing in front gardens, also common in both the UK and the USA. Climate has also influenced housing styles, with balconies and veranda spaces being more prevalent in subtropical Queensland due to the mild, generally warm winters experienced in the state. For many years, Australian homes were built with little understanding of the Australian climate and were widely dependent on European styles that were unsympathetic to Australian landscapes. In recent times, modern Australian residential architecture has reflected the climatic conditions of the country, with adaptations such as double and triple glazing on windows, coordination considerations, use of east and west shade, sufficient insulation, strongly considered to provide comfort to the dweller.

Another aspect of Australian suburbia is that the suburbs tend to have a combination of both upper middle class and middle class housing in the same neighbourhood. In Melbourne, for instance, one early observer noted that “a poor house stands side by side with a good house.” This is somewhat less common today, with home renovations, gentrification and the teardown (“knock down, rebuild”) method becoming more and more common in affluent suburbs, giving a broader distinction between wealthy and lower class areas. However, the teardown technique has led to home buyers purchasing land or older homes in poorer metropolitan areas and building extravagant McMansion style homes on the land, which look out of place and excessive, failing to match with the remaining houses in the street.

Because architectural styles have varied in the country over the years (from villas to bungalows and brick renders), there is a slight inconsistency in the architectural flow of the suburban streets, with one writer noting that Australian housing styles sometimes “co-mingle” and “co-exist” awkwardly. This is less common in the United States of America and England, where most homes along a road were built around the same time, typically in similar styles.

Variation of styles
Because architectural styles have varied in Australia over the years (from villas to bungalows and brick renders), there is a slight inconsistency in the architectural flow of the suburban streets, with one writer noting that Australian housing styles tend to comingle and coexist awkwardly. This is less common in the United States of America and England, because most of the homes had been long established well into the 19th century and reflect a similar style in both regions. Home planners and architects in Australia have suggested adapting similar styles of new homes with the surrounding established homes to create a sense of uniformity.

Old Colonial Period 1788 – c. 1840
Colonial Architecture is the term used for the buildings constructed in Australia between European settlement in January 1788 and about 1840.

The first buildings of the British penal settlement in Sydney were a prefabricated house for the Governor and a similarly prefabricated Government Store to house the colony’s supplies. Sydney was a tent settlement. Building anything more substantial was made unnecessarily difficult by the poor quality of spades and axes that had been provided and the shortage of nails.

The convicts adapted simple country techniques commonly used for animal shelters and the locally available materials to create huts with wattle-and-daub walls. So useful were the local acacia trees for weaving shelters that they were given the name Wattle. Some pipe clay was obtained from the coves around Port Jackson. Bricks were fired in wood fires and were therefore soft. Lime for cement was obtained by burning oyster shells.

The first imported roofing material was corrugated iron sheeting. Roofs of this type were to become part of the Australian vernacular. For many years imported roofing was in very short supply. Two local roofing materials were available- there were extensive reed beds near the Cook’s river for thatching. There was also bark which could be peeled off a number of the indigenous trees in large sheets. Methods of heating and flattening the bark were used by the Aboriginal people and these were quickly assimilated by the convict builders.

The two most significant trees, both of which grew in the Sydney area, were the Melaleuca and the Iron Bark. The Melaleuca bark, having the texture of paper, could be peeled off the tree in layers up to 2 cm thick, a metre long and perhaps half a metre wide without serious damage to the tree. Although not particularly durable as exterior roofing, the material provided excellent insulation and was used for ceilings and lining the walls.

Types of buildings

The simplest houses were of a single room, which, if the bread-winner prospered, became the kitchen to a more substantial residence, or conversely, became the living room with a lean-to kitchen added. Houses that grew piecemeal were generally asymmetrical, with the door leading into the original room.

Houses that were planned were generally symmetrical, and very simple, usually containing 2 to 4 rooms around a central hallway. The kitchen was frequently detached and entered from a rear verandah or covered breezeway where pantry or scullery might also be located. Fireplaces projected outwards from the walls of the house. Except in the case of some small inner-city Georgian row houses built of brick, houses generally had a verandah added to them, often on three sides.

Victorian Period c. 1840 – c. 1890

Gothic Revival
1840–1880
The British Empire, of which Australia was an integral part, was heavily influenced by the Anglican religion. In turn this was influenced by the 19th century teachings of the Oxford and Cambridge Movements which believed Gothic architecture to be the purest, truest form. According to these English movements, this was the only way to achieve spiritual communication with God through architecture. Thus, while a local magnate may have built his home in a classical style, he would fund a church in the Gothic style. Thus, during the 19th century, when Australia was expanding rapidly, two forms of architecture were very evident: Gothic and the Classical styles. Originally Gothic was for God, and the Classical for the man. Later a new “self-made” Australian began to emerge, unhindered by a classical British education dictating classical gentlemanly interests. This “new” self-made man (like his contemporaries in Britain) would often choose Gothic as the design for his home.

The great cathedrals of the Middle Ages during the Gothic Period of ecclesiastical architecture formed the inspiration for this particular architectural style; not only in residential buildings, but in many commercial structures, churches and cathedrals built during this time. St. Paul’s and St. Patrick’s Cathedrals in Melbourne are excellent examples of the Gothic Revival Period, often referred to as Victorian Gothic. Characteristics were: steeply pitched roofs often made of slate, narrow doors and windows resolving in a Gothic pointed arch at their height (known as lancet windows), diamond pane glazing to windows imitating a stained glass affect, and intricate parapets, often of a religious nature, with a cross. In non-terrace houses, the drawing room was often pulled forward, adding a bay window to the front of the dwelling.

Early, Mid and Late Victorian
1845–1900
The Victorian style in Australia can be divided into 3 periods: Early, Mid and Late. The period in its entirety stretches from 1837 to 1901 and was named after the then Queen, Queen Victoria. Early styles featured symmetrical layouts and façades, a centrally located front door and a hipped roof of corrugated iron, leading to a veranda on the façade. During the 1850s cast-iron lacework came to Australia, where it made its way on to Mid and Late Victorian Homes with much the same floor plan as the Colonial Style, a central hallway with a standard 4 rooms. Weatherboards were often used, although larger homes used red brick and blue stone. In the Mid Victorian Style, decoration began to gain popularity. The bullnosed veranda roof was introduced, sidelights were added either side of the front door, and terraced houses were springing up everywhere, containing parapets and detailed dividing walls between the property boundaries. Late Victorian Style homes had perhaps the most decorative features in all of the known architectural styles to date, which is often referred to as Boom Style. Towards the end of the Victorian era, timber fretwork was being used more and more, which led into the Edwardian/Federation Styles.

From the 1840s, a specific style of building emerged in Queensland. The Queenslander style of houses are identifiable by large verandahs and large double doors which open onto these verandahs, stilts rising the house above ground level (particularly in older houses), metal roofs typically of corrugated design and the houses are always constructed of mostly wood.

The styles during this period were: Georgian, Regency, Egyptian, Academic Classical, Free Classical, Filligree, Mannerist, Second Empire, Italianate, Romanesque, Academic Gothic, Free Gothic, Tudor, Rustic Gothic and Carpenter Gothic. Of these fifteen styles, the following seven were normally used for residential architecture:

Georgian
A typical Georgian house of the 19th century was simple, elegant and formal in style.

Regency
The Regency style was a refinement of Georgian, with elaborations like a portico with columns at the front of the house.

Filigree
As housing developed in Australia, verandas became important as a way of shading the house. From the mid-19th century in particular, as people became more affluent, they built more elaborate homes, and one of the favoured elaborations was the filigree, or screen, of cast iron or wrought iron. This developed to the point where it has become one of the major features of Australian architecture. Many homes with this feature are also considered Italianate architecture, the filigree element being the wrought iron balcony.

Italianate
The Italianate style developed as a result of French painters who idealised the Italian landscape and turned it into their version of Arcadia. Their influence was long-lasting and eventually led to the Italianate architectural style of the 19th century. The style featured asymmetry and, usually, a tower of varying size. In Australia, the addition of the verandah, sometimes arcaded but later in Filigree (wrought iron), gave a regional flavour to the style.

Free Gothic
The Gothic style gained favour from the early days of Queen Victoria’s reign. Free Gothic became a popular choice for architects and their clients because it was not concerned with historical correctness and therefore gave them greater freedom in their designs. The style was much in vogue for religious buildings but was sometimes used in residential architecture as well.

Tudor
The Tudor style grew out of a nostalgia for things Old English, particularly focused on the days of Queen Elizabeth I and Henry VIII. Its role in Australia began when the English architect Edward Blore designed Government House in Sydney in 1834. The style spread all over Australia and also influenced later styles like Federation Queen Anne and Inter-War Old English.

Rustic Gothic
The Rustic Gothic style developed out of a “cult of the picturesque” which largely focused on rural images and especially the picturesque “rustic house”, which became known as the cottage orne. In Australia, this style had a great appeal to British settlers who still carried with them a hankering for things English.

Second Empire
Second Empire was preferred for grander mansions. For the rich, particularly in the wealthier parts of the larger metropolitan areas, the style evoked images of French aristocracy. Although rare, examples can be found in the bigger cities. Distinctive features include towers, quoining, mansard and slate roofs, square domes dormer windows, iron cresting and rich classical details. In the Australian setting, domestic interpretations of the style often combined filigree elements such as cast iron verandahs.

Federation period c. 1890 – c. 1915
The Edwardian style was named after King Edward (1901–1910) at the time, and was the predominant style in the United Kingdom and its colonies. The style draws on elements of the Victorian era and the earlier Queen Anne style of the early 18th century. The Edwardian style coincided with the Federation of Australia. Thus, the Federation style was, broadly speaking, the Australian version of the Edwardian, but differed from the Edwardian in the use of Australian motifs, like kangaroos, the rising sun (of Federation), and emus, Australian flora and geometric designs. Some of the most recognisable Federation/Edwardian features include red brick exteriors with embellished wood detail known as fretwork. Cream painted decorative timber features, tall chimneys were all common. Stained glass windows towards the front of the home became increasingly popular during this period. Internally, Victorian-era features were still evident, including plaster ceiling roses and cornices and timber skirting and architraves. Federation style depicted a Tudor type look, especially on gables, and Edwardian gave a simpler cottage look. Terracotta tiles or galvanised iron are generally used for roofing, which is designed with a steep pitch. The gable ends and roof eaves often feature ornate timber brackets, and timber detailing and fretwork are a common inclusion on verandahs.

Federation Arts and Crafts

The Arts and Crafts style came out of a movement to get away from mass-production and rediscover the human touch and the hand-made. The architectural style was characterised by rough-cast walls, shingles, faceted bay windows, stone bases, tall chimneys, high-pitched roofs and overhanging eaves. It was widely used in Australia during the Federation period.

Federation Bungalow
The bungalow style was usually a single-storey house with a prominent veranda, especially with the roof covering the veranda. It is seen as a transition phase between the Federation period and the California bungalow.

Federation Filigree
The filigree style was characterised by the creation of a screen as a prominent style at the front of the house. In the Victorian period, the screen was made of wrought iron, but in the Federation period it was made of wooden fretwork, which could be quite elaborate. It was widely used in Queensland as a way of providing shade and circulation of air for a home.

Inter-War Period c. 1915 – c. 1940
Styles which existed during the 1915-40 period include Edwardian, Georgian Revival, Academic Classical, Free Classical, Bungalow, Mediterranean, Spanish Mission, Art-Deco, Skyscraper Gothic, Romanesque, Gothic and Old English.

Californian Bungalow
1915–1940 This style can almost instantly be recognised by the columns holding up a front veranda area. The name is almost self-explanatory: bungalow, a rugged type of home. This led to the belief that picket fences looked appropriate at the front fence, although originally they were not used. Darker colours were originally used but, as the years went by, new brighter paint served as a welcoming change to open up the spaces and brighten up the homes. Stone, brick and timber, earthy materials were used. A gable roof faced either the front or side always.

Ashgrovian
1930 onwards

Originally specific to Queensland, the [Ashgrovian style developed from the hipped bungalow style and was characterised by a frontage with a grand gable roof, often surrounded by secondary smaller gables behind, the smaller gables usually sheltering verandahs and sleep-outs. A staircase almost always dominated the front yard leading to the verandah.

Spanish Mission
1925–1939

Distinctly recognised by twisted pylons to a porch area covering the front door, usually windows grouped in threes to the side of the front door area on simpler homes. The style was influenced by the American Spanish inhabitant influenced American Architectural styles. Walls were brick in accordance with council regulations at the time, with white or cream yellowish cream stucco finish and Spanish terra cotta tiles.

Old English
1915–1940 The Old English style involved a certain nostalgia for English ways, and tended to draw on Tudor and such-like English styles harking back vaguely to the days of Henry VIII. It had a certain appeal for what was still a predominantly Anglo-Saxon population at the time.

Early Moderne
1930–1940 A very modern looking style at the time, inspired by a German movement known as Bauhaus, representing functional and clinical architecture. Red or cream brick walls and concrete was also first seen. Steel-framed casement sashes, with larger panes of glass and terra cotta tiled roofs with a moderate pitch. The only featured part of the house included matching decorative front fences, and a featured roof affect.

The Streamline Moderne style was a late branch of the Art Deco style. The style emphasized curving forms, long horizontal lines, and sometimes nautical elements, such as railings and porthole windows. This style was adopted into suburban architecture, most notably in the Waterfall style.

Post-War Period c. 1940 – 1960The Austere style reflected the lack of availability of building materials and labour in the years following World War II.

Waterfall (Art Deco) 1940 – 1950
Fashionable modern houses of the thirties in the Streamline Moderne style were sometimes described as being like ocean liners, with walls, windows and balconies all sweeping around corners. By the 1940s these details were entrenched into suburban designs. The ‘Waterfall’ or ‘Waterfall Front’ style came to be known as such from the use of descending curves in chimneys, fence pillars and other vertical elements. Robin Boyd, the Australian architect and writer, noted that three was ‘the key to decorative smartness’; three steps usually being used for the waterfall effect and featured parallel lines were often in threes.

Defining features of houses from this period are curved corner windows, including Venetian blinds, some rare examples of which are curved. With a slightly steeper pitched roof than the Early Modern Style, this style was generally of brick veneer cream brick but also could have dark brown glazed feature brickwork incorporated into the external walls, and under windowsills. Chimneys were either stepped or plain, and together with the round windows perhaps gave meaning to the “Waterfall” name.

Ecclesiastical, International, Melbourne Regional, Brisbane Regional and American Colonial were also styles which existed in the period 1940–1960.

International style
The Rose Seidler House built by Harry Seidler for his parents between 1948 and 1950 in Sydney incorporated Modernist features of open planning, a minimal colour scheme, and labour saving devices that were new to Australia at the time. The house won the Sir John Sulman Medal in 1951 and is today preserved as a museum as a very influential house.

After the second World War, architects in Australia were influenced by the development of the International style of architecture. Some regional variations developed. In Melbourne, Robin Boyd and Roy Grounds articulated a Melbourne interpretation of the modern style. Boyd’s book Victorian Modern (1947) traced the history of architecture in the state of Victoria and described a style of architecture that he hoped would be a response to local surroundings as well as the popular international style. In particular he nominated the work of Roy Grounds and in some outer suburban bush houses of the 1930s as being the early stages of such a style. Grounds and Boyd later worked in partnership.

The houses were typically narrow, linear, and single storey with a low pitched gable roof. They had exposed rafters and wide eaves. Walls were generally bagged or painted brick and windows were large areas of glass with regularly spaced timber mullions.

L-Shape 1945 – 1955
This style represented a change in the overall floor plan, the plan resembling a large “L” Shape. Usually with gabled ends to the L, with terra cotta tiles still being used, as concrete tiles didn’t appear until the late 1960s. Timber or steel framed windows were used, and front-facing fences resembled the house, much the same as had been seen since the Early Modern Period.

Dutch Colonial

Triple front (cream brick) 1950 – 1960s
Distinctly recognisable by their front-facing walls have 3 and sometimes even 4 front-facing walls. This led to the front entrance sometimes brought round to the side within one of the alcoves created by the multiple fronts. Roofs were medium pitched and hipped with concrete tiles being used towards the end of the style in the late 60s. Front fences had a castellated top and feature piers raised above the top of the rest of the brick fence. Decorative iron was used very minimally, in gates to driveways, and balustrades to entrances.

Late twentieth century 1960 – 2000
Styles of the late 20th Century have largely been derived from the current world architectural trends, or have been imitative of previous Australian styles. These styles include Stripped Classical, Ecclesiastical, International, Organic, Sydney Regional, Perth Regional, Adelaide Regional, Tropical, Brutalist, Structural, Late Modern, Post Modern, Australian Nostalgic and Immigrants’ Nostalgic. In the ’80s and ’90s most parts of Australia had a building boom which strained building supplies, so many buildings from this era are characterised by cheap and low quality materials.

A good cross section of Australian residential architectural styles from this period, although not necessarily falling into one of the categories above, follows. Almost all of the houses shown in this section were built after 1960 and photographed just North of Sydney on the Central Coast of NSW.

Each of these styles has a different emphasis to practicality (physical needs, layout, and views), land and environmental considerations (structural requirements for foundations, design for weather protection) and aesthetic considerations (planar, volumetric, and sculptural form, emotional and spiritual qualities.) All of these requirements and qualities should be considered when designing a house.

Painted and rendered triple fronted brick veneer
This style of house has a brick facade (exterior) with timber frames supporting interior walls, usually of gyprock. Roofs are always hipped or gabled and tiled. As mentioned previously in this article, this style, without the painted and rendered brick facade, dominated suburban architecture in the 1950s – 1960s. In its basic form it is a bland and unimaginative style which has been propagated by developers. Due to its familiar and cheap construction, it still is the dominant style in housing estates and many consider the style the scourge of Australian domestic architecture. The basic style has been made more interesting by rendering and painting, adding more angles, variations in roofing, porticos, verandahs, and bay windows. Large homes, 2-story homes of this style have often been described as “McMansions”.

Timber and fibro fisherman’s cottage
The original fisherman’s cottage was built in many coastal towns between the 1930s and 1950s. It was originally a simple timber framed structure of one or two rooms and a verandah which was clad with asbestos sheeting. The floors were generally raised on piles. The verandah sometimes had handsome wooden balustrade that was sometimes enclosed to make an additional room or sleep-out. Timber detail around windows and gables were often painted- cheery red being one of the most popular traditional colours.

The original cottages, being relatively cheap to purchase, are now popular for renovation. Construction is easy and owner-building is common. The older buildings require insulation in the ceiling and walls. Timber and fiber cement sheeting now replaces the original asbestos and often the interior is completed gutted to create a modern open plan style of living. Timber strap-work can be used and windows frames painted for effect.

Regional gabled cottage
This popular style has emerged from the triple fronted brick veneer. While the house footprint and floor plan may be quite similar, the gabled cottage has a very different feel. In this style the distinctive gabled roof is a dominant design element, and a practical means of providing shade and entertaining space. Constructions can be entirely of brick (often painted), entirely timber, or a combination of brick on the lower part of the house and timber on the upper. Some houses of brick construction have featured verandahs and porticos. Roofs are usually galvanized iron and windows metal framed.

While it is well suited to sloping blocks, this style can also be built on a slab. The use of timber cladding greatly reduces weight and construction costs

Ranch style

The ranch-style became popular in the nineties. With conception in the United States, it originated in suburban Adelaide and subsequently became popular in regional and coastal New South Wales. The floor plan is simple and footprint (of at least the street facing section) is often rectangular. Walls are usually brick, or brick and timber, and windows are often colonial style floor-to-ceiling. Roofs usually tiled with extended eaves. The garage was often integrated into the house. Some ranch style houses were boomerang shaped, others were L shaped for corner allotments.

Ranch style houses can be readily combined with the Murcutt/Drew style (timber and galvanized iron). These smaller ranch style houses often have balconies the width of the house.

Murcutt/Drew steel and corrugated iron house

number of styles have emerged from the influence of architects Phillip Drew and Glen Murcutt. The geometric play of angles is often a signature, likewise the (sometimes exposed) steel framing and corrugated iron cladding which is available in a variety of colours. Fiber cement and timber cladding is often used with the iron to create a sympathetic blend of textures. Being of light weight construction, the steel and corrugated iron approach is relatively cheap and suitable for both flat and steeply inclined land. Interior cladding is most often gyprock but can be timber or even plywood. Butterfly roofs can also be employed quite successfully in this design. This style of house is suited for steel framed pole houses on steep slopes.

Pavilion style
The Pavilion style house is characterized by a simple rectangular, box shaped volumetric style, open plan interior with glass replacing much of the wall space. Windows are often also steel framed. The transparency of the walls makes it well suited for blocks with privacy and/or views. Open patios are an integral part of living area, and like the rooms, they are orientated according to the aspect. Roofs are often low pitched roof and skillion. The style was a favorite of architect Harry Seidler who favoured walls of rendered brick however it is also well suited to a steel, fiber cement, and corrugated iron treatment. This approach often requires the thinness of steel framing to create the desired look.

Queenslander style (Australian Nostalgic)

The Queenslander style house is characterized by an all timber painted exterior, a timber stud frame, and a floor raised on piles for air flow in hot climate. They have wide verandahs (often the length of the house and enclosed by shutters, and roofs are gabled and corrugated iron. The street facing view is often symmetrical. The NSW Queenslander is often smaller than the original classic Queenslander and is less decorative probably due to limited supply of delicate timber detail and trades-people to build them. It is sometimes combined with the Ranch style house.

Contemporary styles
Contemporary styles from 2000 onwards include post modernism, modernism and pop architecture.

Adaptive
Adaptive reuse has become popular in Australia for residential conversions.

Source From Wikipedia