Categories: Architecture

Natural building

A natural building involves a range of building systems and materials that place major emphasis on sustainability. Ways of achieving sustainability through natural building focus on durability and the use of minimally processed, plentiful or renewable resources, as well as those that, while recycled or salvaged, produce healthy living environments and maintain indoor air quality. Natural building tends to rely on human labor, more than technology. As Michael G. Smith observes, it depends on “local ecology, geology and climate; on the character of the particular building site, and on the needs and personalities of the builders and users.”

The basis of natural building is the need to lessen the environmental impact of buildings and other supporting systems, without sacrificing comfort or health. To be more sustainable, natural building uses primarily abundantly available, renewable, reused or recycled materials. The use of rapidly renewable materials is increasingly a focus. In addition to relying on natural building materials, the emphasis on the architectural design is heightened. The orientation of a building, the utilization of local climate and site conditions, the emphasis on natural ventilation through design, fundamentally lessen operational costs and positively impact the environment. Building compactly and minimizing the ecological footprint is common, as are on-site handling of energy acquisition, on-site water capture, alternate sewage treatment and water reuse.

development trend
Over time, the sport has developed two different development trends between developed and developing countries. In highly developed areas, people have been baptized with modern civilization and fully enjoyed the benefits of material civilization, but they have also begun to suffer the consequences of over-exploitation. Some of them have thus begun to reflect on and reflect on the industrial revolution and modern life for the entire human society, The living environment, and even the impact of personal life, return to life, learn from nature, and return to a simple and laboring life. On the other hand, in areas with slow development, although the mainstream value still reflects the general desire for material civilization, it is more economical. Poor, unqualified areas supporting the development of modern science and technology and the industrialization of architecture, people have turned to ancient wisdom, natural materials in the earth, and traditional methods of reform or innovation to seek ways to improve existing living conditions.

Spiritual content
The reason why the natural building movement formed and then formed a force is not that it is a unique and unique architectural method, but it is not to create more buildings, but it is to serve as an overall life practice for all aspects of food and clothing. Part of it, thus embodying the meaning and value of simple life, as well as the pursuit and exploration of life and life, and exploring the alternative possibility of human living space. Personally speaking, it is possible to practice simple and natural life and life. From the point of view of the environment, it is not necessary to make millennium-undamaged building structures, but to fundamentally self-cleanse the building and its related activities, so that the building is in its entirety. It does not pollute the land during the life cycle, and does not leave garbage to the earth or leave as much garbage as possible when people leave the world or the building ends its life cycle. Basically speaking, if the way of living and living can be natural and simple, there is actually no need to solve the environmental problems. Buildings are the containers of life. All the space and facilities needed to satisfy all activities in life are the themes of architectural design and construction. Therefore, the scope of attention paid to natural buildings is not only in buildings, but also in the scope of their surrounding land and necessary living facilities.

Important rules
In a broad sense, natural architecture encompasses a variety of different materials and methods that are conceivable. The only criterion that must be pursued is whether the practices adopted are the least dependent on the environment and the least energy consumed in the use of material resources. The impact on the environment is minimal. In the selection of materials, the principle that the local materials are mainly adopted is to use the materials and natural materials on the ground as much as possible. If necessary, the least-processed materials should be used as much as possible, and a lot of recycled materials should be used. Before the construction, it is necessary to start collecting materials gradually and store them properly. In the construction method, manpower and hand tools are the main power and tools, and the use of power tools is minimized. Home builders must assess the construction method to be adopted according to individual conditions. In principle, the technical threshold is low. Most of the work can be easily started by individuals and they are the main assessment criteria.

In terms of energy use, the basic application methods include understanding and adapting the geographical environment conditions to create a comfortable and minimum energy consumption environment; establishing a cycle of materials and energy, such as kitchen waste compost, dry and wet separated composting toilets, rainwater, Zhongshui; combines renewable energy technologies such as solar thermal, solar photovoltaic, and wind to meet the needs of modern life. With limited resources on the earth, waste is lost as waste and pollution, recycling becomes a resource, and recycling of resources can be used forever.

Natural buildings may have different choices and practices due to people, time, and place. There is no absolute standard or non-standard. However, once a person no longer needs a building, every piece of his composition will be recycled. In addition to the industrialized materials, they should be able to restore naturally to the form of composition that existed when they left the land and return to the natural cycle. In addition, if recycled industrial materials are used, they should not consume energy nor be contaminated during recycling. For example, although soil is a common material on land, it must be formed after a long geological time, and arable land is only distributed on a thin surface in a specific area. Take such a precious soil as a building material to consider: First, as part of building materials, when the end of the life cycle, whether the soil can still be easily separated out, return to the pastoral again, or only enter the waste landfill Second, whether the soil that has returned to the idyllic countryside is as clean as ever, and can be used to plant healthy crops with peace of mind.

This activity, in which body labor and spiritual creativity are the main subjects of life, is a craving for clean life and life, an attempt to restore the tradition of self-reliance and cooperation, and development of teachers and methods to inherit the ancestors’ architectural wisdom and the skills of traditional craftsmen and seek further. Research and development, the use of creativity to develop the characteristics of natural materials and recycled materials in the ground, combined with reasonable environmental protection technology and technology, establish a material and energy circulation system and meet the modern people’s requirements for aesthetic and living quality, and can give traditional materials, construction methods, The new life of technology is suitable for the use of contemporary life and the ultimate ideal of harmonious coexistence between man and the environment. Therefore, although a large part of natural buildings absorbs nourishment from the traditional methods of construction, there is no restriction on the framework of traditional architecture. As long as the creativity and the capacity of the homebuilder can bear, it is full of various modes of practice. The possibility is arguably a very experimental building.

The spirit of natural architecture is to take only what one needs and only create the space necessary for survival. For construction beyond this limit, even if natural or recycled materials are used, another form of waste will be added under the name of natural construction. During each period of human history, the most suitable engineering and technology for local climate, living culture, manpower and material conditions will be developed in different places to meet contemporary residential needs.

The development potential of natural architecture on the one hand summons ancient wisdom to return to the construction and life of ordinary people. It is a spirit and construction method that is full of compassion, localization, manual labor, gentleness and friendliness to the environment and all living things including humanity. Technology is in harmony with the earth and at the same time meets the necessary comforts, aesthetics, functions, and safety needs of modern life. This creates a space that modern people are happy to live in, and then enhances the look of modern life and becomes more intimate and natural. health. In the international arena, the natural construction movement has so far developed for decades. This movement to return to nature may still fail to put forward the answer to the sustainable survival of humankind. However, over the years, it has been reluctant to seek industrialization beyond all sincerity. Another possibility, a conscious choice of simple life.

Learning and practice
At present, common practices include professional courses for fixed-point bases that are self-directed homebuilders, amateurs who are interested, or those who intend to invest in professional activities. Among them, professional training courses are often combined with site internships. After the course is over, teachers are dispatched to various places to follow experienced professionals to continue to hone their skills to the point of independence. Inexperienced self-created homebuilders, in addition to their ability to pursue self-education to have a leading project, often invite professionals to open workshops on their site.

Materials
The materials common to many types of natural building are clay and sand. When mixed with water and, usually, straw or another fiber, the mixture may form cob or adobe (clay blocks). Other materials commonly used in natural building are: earth (as rammed earth or earth bag), wood (cordwood or timber frame/post-and-beam), straw, rice-hulls, bamboo and stone. A wide variety of reused or recycled non-toxic materials are common in natural building, including urbanite (salvaged chunks of used concrete), vehicle windscreens and other recycled glass.

Other materials are avoided by practitioners of this building approach, due to their major negative environmental or health impacts. These include unsustainably harvested wood, toxic wood-preservatives, portland cement-based mixes and derived products such as Autoclaved aerated concrete, paints and other coatings that off-gas volatile organic compounds (VOCs), steel, waste materials such as rubber tires in regions where they are recycled, and some plastics; particularly polyvinyl chloride (PVC or “vinyl”) and those containing harmful plasticizers or hormone-mimicking formulations.

Techniques
Many traditional techniques and materials are now experiencing a resurgence of popularity. This differs around the world based on climate appropriate building design and the availability of local materials.

Adobe
One of the oldest building methods, adobe is simply clay and sand mixed with water. Often, chopped straw or other fibers are added for strength. The mixture is then allowed to dry in the desired shape. Usually adobe is shaped into bricks that can be stacked to form walls.

Various claims are made about the optimal proportions of clay and sand (or larger aggregate). Some say that the best adobe soil contains 15% – 30% clay to bind the material together. Others say equal proportions of clay and sand are best to prevent cracking or fragmenting of the bricks. The blocks can either be poured into molds and dried, or pressed into blocks. Adobe colored with clay and polished with natural oil makes an attractive and resilient floor.

To protect the walls and reduce maintenance, adobe buildings usually have large overhanging eaves and sizeable foundations. Adobe can be plastered over with cob or lime-based mixes for both appearance and protection. Adobe has good thermal mass, meaning that it is slow to transmit heat or cold. It is not a good insulator, however, so insulation can be added (preferably on the outside), or a double wall built with airspace or insulation in between. The traditional thick, un-insulated adobe has proven to perform best in regions without harsh winters or where daily sun is predictably available during those cold periods.

Cob
The term cob is used to describe a monolithic building system based on a mixture of clay, sand, straw and earth. The construction uses no forms, bricks or wooden framework; it is built from the ground up. Various forms of “mud” building have been used in many parts of the world for centuries, under a variety of names, and date from at least 10,000 years ago. Cob building began use in England prior to the 13th century, and fell out of favor after World War I, although it is seeing a resurgence today. Cob is one of the simplest and least expensive building techniques available, though it is typically very labor-intensive. Cob’s other great advantage is versatility; It can easily be shaped into any form. While cob building was falling out of favor in England by the late 19th century, thousands of cob structures have endured to the present (20,000 in Devon, England alone). It is estimated that from one third to one half of the world’s population lives in earthen dwellings today. Although typically associated with “low-rise” structures, in Yemen and other Middle-Eastern countries it has, for centuries, been used in “apartment” buildings of eight stories and more.

Related Post

Cob-like mixes are also used as plaster or filler in several methods of natural building, such as adobe, earth bags, timber frames, cordwood, and straw bales. Earth is thus a primary ingredient of natural building.

Cordwood
Cordwood construction is a term used for a natural building method in which “cordwood” or short lengths of pieces of debarked tree are laid up crosswise with masonry or cob mixtures to build a wall. The cordwood, thus, becomes infill for the walls, usually between posts in a timber frame structure. Cordwood masonry can be combined with other methods (e.g., rammed earth, cob or light clay) to produce attractive combinations. Cordwood masonry construction provides a relatively high thermal mass, which helps to minimise fluctuations in temperature.

Earthbag
Earth is the most typical fill material used in bag-wall construction techniques. This building method utilizes stacked polypropylene or natural-fiber (burlap) bags filled with earth or other mixes without a stabilizer, other than clay, to form footings, foundations, walls and even vaulted or domed roofs. In recent years, building with earth bags has become one of the increasingly practiced techniques in natural building. It facilitates self-contained, often free-form rammed-earth structures. Its growing popularity relates to its use of an abundant and readily available often site-available material (earth) in a potentially inexpensive building technique that is flexible, and easy to learn and use. However, because earth is a poor insulator, in more extreme climates other filler variations are now being explored, substituting pumice, rice-hulls or another material with better insulating value for all or part of the earth (see also Rice-hull bagwall construction).

Hempcrete
Hempcrete or Hemplime is bio-composite material, a mixture of hemp hurds (shives) and lime (possibly including natural hydraulic lime, sand, pozzolans) used as a material for construction and insulation. It is marketed under names like Hempcrete, Canobiote, Canosmose, and Isochanvre. Hempcrete is easier to work with than traditional lime mixes and acts as an insulator and moisture regulator. It lacks the brittleness of concrete and consequently does not need expansion joints. The result is a lightweight insulating material ideal for most climates as it combines insulation and thermal mass.

Like other plant products, hemp absorbs CO2 from the atmosphere as it grows, retaining the carbon and releasing the oxygen. Theoretically 165 kg of carbon can be absorbed and locked up by 1 m3 of hempcrete wall during manufacture. Furthermore the carbonation of the lime during curing adds to this effect as lime turns to limestone.

The typical compressive strength is around 1 MPa, around 1/20 that of residential grade concrete. It is a low density material and resistant to crack under movement thus making it highly suitable for use in earthquake-prone areas. Hempcrete walls must be used together with a frame of another material that supports the vertical load in building construction, as hempcrete’s density is 15% that of traditional concrete.

Rammed earth
Rammed earth is a wall system made of compacted earth, or another material that is compacted. It is extremely strong and durable. Quality rammed earth walls are dense, solid, and stone-like with great environmental benefits and superior low maintenance characteristics. As an option depending on climate rigid insulation can be placed inside the wall. Similarly, depending on seismic concerns bamboo or other tensile natural materials can be used to reinforce the wall.

Rammed earth has been used for around 10,000 years in all types of buildings from low rise to high-rise and from small huts to palaces.

Rammed earth walls are formed in place by pounding damp sub-soil (containing sand, clay and sometimes gravel) into movable, reusable forms with manual or machine-powered tampers. In traditional rammed earth, a mixture of around 70% aggregate (gravel,sand) and 30% clay is optimal. Pigmentation may be added in the mix to achieve the desired color. Around 5-10 inches of mixed damp sub-soil are placed inside the forms and pounded to total compaction and the process is repeated until the desired height is achieved. What is left after the forms are removed is a wall that is structural and can last over 1000 years.

Stone
Stone has been used as a building material for thousands of years. It has long been recognized as a material of great durability. The pyramids in Giza, burial chambers in the UK and temples in Malta were all built from stone over 4000 years ago and are still standing. The earliest form of stone construction is known as dry stone, or dry stacking. These are freestanding structures such as field walls, bridges and buildings that use irregularly shaped stones carefully selected and placed so that they fit closely together without slipping. Structures are typically wider at the base and taper in as height increases. They do not require any special tools, only the skill of the craftsman in choosing and placing the stones.

Traditional stone masonry evolved from dry stone stacking. Stone blocks are laid in rows of even (courses) or uneven (un-coursed) height, and fixed in place with lime mortar pasted between the stones. Traditional stone masonry is rarely used today because stone is expensive to quarry, cut and transport, and the building process is labor and skill-intensive.

Stone is a highly durable, low maintenance building material with high thermal mass. It is versatile, available in many shapes, sizes, colors and textures, and can be used for floors, walls, arches and roofs. Stone blends well with the natural landscape, and can easily be recycled for other building purposes.

Straw bale
Although grasses and straw have been in use in a range of ways in building since pre-history around the world, their incorporation in machine-manufactured modular bales seems to date back to the early 20th century in the midwestern United States, particularly the sand-hills of Nebraska, where grass was plentiful and other building materials (even quality sods) were not. Straw bale building typically consists of stacking a series of rows of bales (often in running-bond) on a raised footing or foundation, with a moisture barrier between. Bale walls are often tied together with pins of bamboo or wood (internal to the bales or on their faces), or with surface wire meshes, and then stuccoed or plastered either lime-based formulations or earth/clay renders. Bale buildings can either have a structural frame of other materials, with bales between (simply serving as insulation and stucco substrate), referred to as “infill”,or the bales may actually provide the support for openings and roof, referred to as “load-bearing” or “Nebraska-style”, or a combination of framing and load-bearing may be employed, referred to a “hybrid” straw bale.

Typically, bales created on farms with mobile machinery have been used (“field-bales”), but recently higher-density “recompressed” bales (or “straw-blocks”) are increasing the loads that may be supported; where field bales might support around 600 pounds per linear foot of wall, the high density bales bear up to 4,000 lb./lin.ft.

Timber frame
The basic elements of timber frame building—joined timbers, clay walls and thatch roofs were in place in Europe and Asia by the 9th century. It remained the common mode of house construction in northern cultures until the 19th century. Craftsmanship was, and is, an important value in timber frame building. The oldest timber frame structures (for example, the timber framed stave churches of Scandinavia) show both craftsmanship and a strong grasp of the technical aspects of structural design, as do such structures in Japan.

Timber framing typically uses a “bent.” A bent is a structural support, like a truss, consisting of two posts, a tie beam and two rafters. These are connected into a framework through joinery. To practice the craft, one must understand the basic structural aspects of the bent. This, along with a knowledge of joinery, are the basis of timber frame building.

Timber framing is now a modern method of construction, Ideally suited to mass house building as well as public buildings. In conjunction with a number of natural insulations and timber cladding or modern lime renders, it is possible to quickly construct a high performance, sustainable building, using completely natural products. The benefits are many—the building performs better over its lifespan, waste is reduced (much can be re-cycled, composted or used as fuel). Timber frame structures are frequently used in combination with other natural building techniques, such as cob, straw bale, or cordwood/masonry.

Source From Wikipedia

Share