A drafter or draftsman, drafting technician is a person who makes detailed technical drawings or plans for machinery, buildings, electronics, infrastructure, sections, etc. Drafters use software and manual sketches to convert the designs, plans, and layouts of engineers and architects into a set of technical drawings. Drafters operate as the supporting developers and sketch engineering designs and drawings from preliminary design concepts.
Apprentices are thus trained at the vocational school and in training companies. The focus of the training is on the production of detailed and standardized technical drawings and plans. The basis for this are concepts, ideas and work sketches that originate from architects, engineers or design engineers. They mainly learn to draw using computer-aided design (CAD) systems.
The training ends with the final apprenticeship exam. Related teaching professions, such as B. Draftsman or designer can be completed with a shorter apprenticeship. Passing the final apprenticeship exam in Austria also allows access to the vocational diploma and, as a result, further higher qualifications at colleges or universities.
The reorganization of job profiles also causes a change in the previous job title technical draftsman (technical draftswoman). There are two professions with new content and structural interfaces. In the profession of technical system planner (the technical system planner), the main contents of the “old” disciplines of heating, air conditioning, sanitary engineering, steel and metal construction technology from the training profession of the technical draftsman are combined with a new field of study Electrical Systems. In the profession of the “new” technical product designer (the technical product designer), the essential contents of the disciplines of mechanical and systems engineering and wood technology from the training profession of the technical draftsman are connected with the “old profession” of the technical product designer.
Due to the technical development in the last 30 years, the job description has changed a lot. Drawing on the drawing board was almost completely replaced by computer-aided design (CAD). As a result, the demands placed on technical draftsmen shifted from manual skills to theoretical knowledge. On the one hand, CAD usually creates and links extensive and complex databases, the structure of which should be overseen by the technical draftsman. On the other hand, in particular the virtual 3D modeling, which is already standard in some disciplines, can not be realized without a deep understanding of the constructive framework conditions.
In the past, drafters sat at drawing boards and used pencils, pens, compasses, protractors, triangles, and other drafting devices to prepare a drawing by hand. From the 1980s through 1990s, board drawings were going out of style as the newly developed computer-aided design (CAD) system was released and was able to produce technical drawings at a faster pace. Many modern drafters operate computer-assisted drafting equipment and software such as AutoCAD, Vectorworks, Revit, or Solidworks but board drafting still remains the base of the CAD system. Consequently, drafters may also be casually referred to as CAD operators, engineering draftspersons, or engineering technicians.
With CAD systems, drafters can create and store drawings electronically so that they can be viewed, printed, or programmed directly into automated manufacturing systems. CAD systems also permit drafters to quickly prepare variations of a design. Although drafters use CAD extensively, it is only a tool. Drafters still need knowledge of traditional drafting techniques, in addition to CAD skills. Despite the near global use of CAD systems, manual drafting and sketching are used in certain applications.
Drafters’ drawings provide visual guidelines and show how to construct a product or structure. Drawings include technical details and specify dimensions, materials, and procedures. Drafters fill in technical details using drawings, rough sketches, specifications, and calculations made by engineers, surveyors, architects, or scientists. For example, drafters use their knowledge of standardized building techniques to draw in the details of a structure. Some use their understanding of engineering and manufacturing theory and standards to draw the parts of a machine; they determine design elements, such as the numbers and kinds of fasteners needed to assemble the machine. Drafters use technical handbooks, tables, calculators, and computers to complete their work.
Drafting work has many specialities such as:
Aeronautical drafters prepare engineering drawings detailing plans and specifications used in the manufacture of aircraft, missiles, and related parts.
Architectural drafters draw architectural and structural features of buildings and other structures. These workers may specialize in a type of structure, such as residential or commercial, or in a kind of material used, such as reinforced concrete, masonry, steel, or timber.
Civil drafters prepare drawings and topographical and relief maps used in major construction or civil engineering projects such as buildings, highways, bridges, pipelines, flood-control projects, and water and sewage systems.
Electrical drafters prepare wiring and layout diagrams used by workers who erect, install, and repair electrical equipment and wiring in communication centers, power plants, electrical distribution systems, and buildings.
Electronics drafters draw wiring diagrams, circuit board assembly diagrams, schematics, and layout drawings used in the manufacture, installation, and repair of electronic devices and components.
Mechanical drafters prepare drawings showing the detail and assembly of a wide variety of machinery and mechanical devices, indicating dimensions, fastening methods, manufacturing equipment, and mechanical installation infrastructure.
Process piping or pipeline drafters prepare drawings used in the layout, construction, and operation of oil and gas fields, refineries, chemical plants, and process piping systems.
Photovoltaic drafters prepare drawings showing inverter Pad location drawings and slab construction drawings, also prepare specific photovoltaic system assembly details and some wiring diagrams.
Drafters work in architectural offices, manufacturing companies, engineering firms, CAD-specific work-groups, construction companies, engineering consultancy firms, the government, natural resource companies or are independently self-employed. Drafting technologists and technicians often work as part of a broader multidisciplinary engineering team in support of engineers, architects or industrial designers or they may work on their own. The position of a drafter is one of a skilled assistant to architects and engineers. Drafters usually work in offices, seated at adjustable drawing boards or drafting tables when doing manual drawings, although modern drafters work at computer terminals much of the time. They usually work in an office environment, but some may have to travel and spend time on manufacturing plants or construction sites. Because they spend long periods in front of computers doing detailed technical work, drafters may be susceptible to eyestrain, back discomfort, and hand and wrist problems. Most drafters work standard 40-hour weeks; only a small number work part-time.
High school courses in English, mathematics, science, electronics, computer technology, drafting and design, visual arts, and computer graphics are useful for people considering a drafting career. Attributes required by drafters include technical writing skills, problem-solving skills, the ability to visualize three-dimensional objects from two-dimensional drawings as well as drawing the relationships between parts in machinery and various pieces of infrastructure. Other skills include an in depth knowledge of the qualities of metals, plastics, wood and other materials used in the overall manufacturing processes and of construction methods and standards. Employers prefer applicants who have also completed training after high school at a vocational school. Drafting and design certificates and diplomas are generally offered by trade and technical schools and non-university higher education institutions like community colleges or industrial training institutes. Apprenticeships combine paid on-the-job training and experience with in-class instruction. People interested in becoming drafters can get qualified as either drafting technologists or drafting technicians. Drafting technologists usually have a 2 to 3-year diploma in engineering design or drafting technology from a community college or technical school. Drafters starting out tend to move from company to company to gain experience and to move up. A more senior drafter often moves up into a management position where they become able to supervise entire projects as they gain more experience or they can start their own business and become self-employed. It is also possible for experienced drafters to enter related fields such as engineering, architecture, industrial design, interior design, exhibit design, landscape design, set design, and animation.